Project · Residential Roofing

Low-Slope Roof Replacement in Dallas–Fort Worth

A low-slope section of a home's roof, worn through and patched over the years, re-roofed with a new granulated modified-bitumen cap sheet — and flashed and tied back into the shingle roof where the two meet, which is where these roofs usually leak.

Low-Slope Roof Modified Bitumen Shingle Tie-In Transition Flashing

Before & After

Same roof, new surface

Before Worn low-slope roof section with the old cap sheet wearing through and patched seams, before replacement
Cap sheet worn through
After Finished low-slope roof with a new brown cap sheet, tied into the shingle roof beside it
New cap sheet, tied into the shingles

What We Did

A new surface, and a sealed transition

The low-slope part of this roof had worn down to the point where the surface was coming away and old patches marked where it had leaked before. Patching it again would only have bought a season, so the whole section was re-roofed with a granulated modified-bitumen cap sheet — a roll roofing built for low pitches, where shingles cannot shed water fast enough.

The other half of the job was the edge where the low-slope section meets the shingle roof. We ran metal flashing along that transition and worked the shingles back in over it, so water coming off the main roof crosses the joint instead of getting under it.

Property
Residential home
Location
Dallas–Fort Worth
Roof system
Modified-bitumen cap sheet with shingle tie-in
Scope
Low-slope section re-roofed, transition flashed, shingles tied in

Scope of Work

  • Worn low-slope section re-roofed with a new cap sheet
  • Seams lapped and sealed across the whole section
  • Metal flashing along the low-slope-to-shingle transition
  • New shingles worked back in over the flashing
  • Roof blown off and site cleaned before we left

Why It Matters

Why low-slope sections leak first

Water sits longer

On a shallow pitch, rain drains slowly, so any worn spot or open seam has water standing on it instead of running past it.

Shingles are the wrong material

Shingles need pitch to shed water. A low-slope section needs a membrane or roll roofing made for it, like the modified bitumen used here.

The transition is the weak point

Where a low-slope roof meets a steeper one, water from the main roof lands on the joint. Without proper flashing, it gets underneath.

Project Photos

From worn roof to finished tie-in

Click any photograph to open it full size.

Next Step

Talk to the crew that will do the work

Every estimate is free and starts with a walkthrough. Call and speak to RGS General Contracting directly — no call centre, no sales handoff.

Pay Over Time

Fix the roof now, pay over time

A roof rarely fails on a convenient schedule. Through our partner Lyon Financial — a specialty lender since 1979 — you can finance the work with low, fixed rates, loans up to $250,000, and terms up to 20 years.

Apply with Lyon Financial How Financing Works
Official Financing Partner Lyon Financial — making backyard dreams come true since 1979. Loans up to $250,000, low fixed rates, terms up to 20 years, veteran owned.

Ready to start your project?

Tell us a bit about the job and we'll follow up within 24 hours with next steps — free estimates on every project, every time.